Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. E2o
    4. : How do you charge the Mahindra E2O?

Mahindra E2o - Video tutorial

Model: Mahindra E2o MK 1 - Years 2013-2017
Part: Checks and maintenance
Operation: How do you charge the Mahindra E2O?

To be able to recharge the Mahindra E2O you must obviously go and park the car next to a charging column. Then it will be necessary to lift the tailgate to locate the charging socket located next to the right rear light. The charging cable must be inserted into this socket, lowering the hood during the duration of the operation. From the display inside the passenger compartment it will be possible to check the state of charge of the battery: when this has reached 100% it will be possible to disconnect the plug and close the tailgate.


Posted on 29 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos