Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Mahindra XUV300?

Model: Mahindra Xuv300 MK 1 - Years 2019-2026
Part: Service warning light

In this tutorial, you will see how to reset the service light on the Mahindra XUV300. Before performing this simple and quick operation, make sure to complete all required maintenance tasks. Start by inserting the key, then press and hold the "SET" button located in the center console while simultaneously turning on the ignition by pressing the Start/Stop button. At this point, keep holding the "SET" button for about 5 seconds, then release it and check that the procedure was successful in the "Car Info" section of the main menu.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Mahindra Xuv300 (2019-2026 / MK 1) In order to reset the Service light of the Mahindra XUV300, you need to turn on the instrument panel by inserting the ignition key into the ignition …
Mahindra Xuv300 (2019-2026 / MK 1) You can completely turn off the Service light that appears on the instrument cluster of the Mahindra XUV300 by turning on the ignition, inserting the…
Mahindra Xuv300 (2019-2026 / MK 1) To reset the service light on your Mahindra XUV300, follow these steps. First, enter the cabin and take your seat in the driver's position. Next, tur…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos