Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light of the Mahindra XUV300?

Model: Mahindra Xuv300 MK 1 - Years 2019-2026
Part: Service warning light

In order to reset the Service light of the Mahindra XUV300, you need to turn on the instrument panel by inserting the ignition key into the ignition switch and pressing the appropriate ignition button: at the same time, you will need to hold down the SET button located on the central dashboard panel. Once the panel is turned on, you will notice that the Service light will reset completely after a few seconds; when the reset is complete, you can proceed by turning off and on the panel to verify that the reset has been completed.

Posted on 24 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Mahindra XUV300
How to Reset the Service Light on the Mahindra XUV300
Mahindra Xuv300 (2019-2026 / MK 1) To reset the service light on your Mahindra XUV300, follow these steps. First, enter the cabin and take your seat in the driver's position. Next, tur…
How to Reset the Service Light on the Mahindra XUV300?
How to Reset the Service Light on the Mahindra XUV300?
Mahindra Xuv300 (2019-2026 / MK 1) In this tutorial, you will see how to reset the service light on the Mahindra XUV300. Before performing this simple and quick operation, make sure to…
How to Reset the Service Light on the Mahindra XUV300?
How to Reset the Service Light on the Mahindra XUV300?
Mahindra Xuv300 (2019-2026 / MK 1) You can completely turn off the Service light that appears on the instrument cluster of the Mahindra XUV300 by turning on the ignition, inserting the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos