Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv500
  6. : How to replace the key battery of the Mahindra Xuv 500

Mahindra Xuv500 - Video tutorial

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Key
Operation: How to replace the key battery of the Mahindra Xuv 500

If the key battery in your Mahindra Xuv 500 is completely dead and you need to replace it then this guide is all you need. In fact, it will be enough for you to put the following steps into practice to be able to carry out the replacement without any difficulty. First locate the button located on the side of the cover and press it so as to be able to remove the emergency key. Immediately after, remove the back cover with your hands or with the help of a flat screwdriver. At this point you just have to remove the exhausted battery and replace it with a new one (model CR2025). Finally, put the cover back on.


Posted on 28 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos