Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Mahindra XUV500?

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Service warning light

In this tutorial, you will see how to reset the service light on a Mahindra XUV500, a very simple and quick operation. Before doing this, ensure you have completed all required scheduled maintenance tasks. Start by entering the cabin, then insert the key and locate the triangular button on the right side of the dashboard. At this point, turn on the ignition while holding the same button, keeping it pressed until the system fully initializes. Check that the reset was successful from the appropriate screen on the display.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Mahindra Xuv500 (2011-2018 / MK 1) We will go through the steps to reset the service light for routine maintenance on the Mahindra XUV500. First, get inside the cabin and press and hol…
Mahindra Xuv500 (2011-2018 / MK 1) This guide shows you how to reset the maintenance light for the oil change that appears on the central display of the Mahindra XUV500. First, get in …
Mahindra Xuv500 (2011-2018 / MK 1) To reset the Service light on the Mahindra XUV500, press and hold the button located on the rear side of the instrument cluster while the instrument …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos