Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on Malaguti Dune 125?

Model: Malaguti Dune 125
Part: Headlight bulb

Video tutorial

You can replace the front headlight bulb on the Malaguti Dune 125 by detaching the panel located at the bottom of the headlight, accessible from the inside of the front shield: by removing the corresponding panel, you will be able to locate the bulb inside, which should be disconnected from the corresponding connector and extracted from its housing.

Once the old bulb has been removed, you can connect the new one to the connector: it can then be placed back in its seat, closing everything with the panel.


Posted on 15 April 2026 by ScegliAuto


Related tutorials

How do you replace the spark plug of the Malaguti Dune 125?
How do you replace the spark plug of the Malaguti Dune 125?
Dune 125 The spark plug of the Malaguti Dune 125 can be replaced by disconnecting the corresponding ignition coil located on the top of the engine cylinder: o…
How to Bleed the Brakes on a Malaguti Dune 125?
How to Bleed the Brakes on a Malaguti Dune 125?
Dune 125 You can bleed the brakes on the Malaguti Dune 125 by loosening the small bleed screw located at the brake caliper for both the front and rear brakes;…
Engine Oil Change on Malaguti Dune 125 - Derbi Terra 125
Engine Oil Change on Malaguti Dune 125 - Derbi Terra 125
Dune 125 In this video, you will find the main instructions for performing an engine oil change during the regular maintenance service on a Malaguti Dune 125,…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos