Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To install a 12V socket on the Malaguti Madison 125, connect the piece to the appropriate wires, as shown in the video. Next, loosen the screws securing the front fairing and remove it: after removal, the socket should be inserted into the designated housing located beneath the handlebars. The wires should pass through it, so they are visible at the front of the bike, now without the fairing. The wires should then be connected as shown in the video; once complete, you can reattach the front fairing.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Variator Rollers on Malaguti Madison 125
Replacing the Variator Rollers on Malaguti Madison 125
Madison 125 In this video tutorial, we will see how to disassemble and replace the rollers of the variator on a Malaguti Madison 125. First, remove the screws fr…
How to Reset the Service Light on a Malaguti Madison 125?
How to Reset the Service Light on a Malaguti Madison 125?
Madison 125 To reset the Service light on the Malaguti Madison 125, turn the key to switch on the instrument panel, confirming that the light is indeed on. Now, …
Changing the Rollers of the Variator on a Malaguti Madison
Changing the Rollers of the Variator on a Malaguti Madison
Madison 125 Before proceeding to replace the rollers of the variator on a Malaguti Madison, ensure the scooter is stable and secure to guarantee a safer job. Thi…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos