Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the Service light on the Malaguti Madison 125, turn the key to switch on the instrument panel, confirming that the light is indeed on. Now, turn off the panel and, while it is off, press and hold the MODE button on the control panel. While holding it down, turn the key to switch on the instrument panel and wait a few seconds for the check to finish. Once this is complete, the light will automatically turn off, and you can verify that the reset has occurred correctly by turning the instrument panel off and on again.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Variator Rollers on Malaguti Madison 125
Replacing the Variator Rollers on Malaguti Madison 125
Madison 125 In this video tutorial, we will see how to disassemble and replace the rollers of the variator on a Malaguti Madison 125. First, remove the screws fr…
How to Install a 12V Socket on the Malaguti Madison 125?
How to Install a 12V Socket on the Malaguti Madison 125?
Madison 125 To install a 12V socket on the Malaguti Madison 125, connect the piece to the appropriate wires, as shown in the video. Next, loosen the screws secur…
How to Change the Variator Rollers on a Malaguti Madison
How to Change the Variator Rollers on a Malaguti Madison
Madison 125 Before starting the replacement of the variator rollers on a Malaguti Madison, ensure the scooter is stable and secure for working. At this point, pr…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos