Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Choose the Speed Unit on the Malaguti Spidermax GT 500?

Model: Malaguti Spidermax Gt 500
Part: Checks and maintenance

Video tutorial

To select the unit of measurement on the Malaguti Spidermax GT 500, you need to disconnect the dashboard power for about 3-4 minutes by removing the relevant panel on the left. Once removed, you can reinsert it, allowing the display to turn on even in the OFF position: a screen will appear to choose between km/h and MPH. By pressing the MODE button on the right-hand side of the steering wheel, you can select either option.

Additionally, holding the button for a few seconds will confirm the selection and turn off the instrument cluster.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Reset the ECU of the Malaguti Spidermax GT 500?
How to Reset the ECU of the Malaguti Spidermax GT 500?
Spidermax Gt 500 To reset the ECU of the Malaguti Spidermax GT 500, open the fuse box of the vehicle: this is located in the lower left fairing relative to the steeri…
How to Replace the Switch Panel of the Malaguti Spidermax GT 500?
How to Replace the Switch Panel of the Malaguti Spidermax GT 500?
Spidermax Gt 500 To replace the switch panel of the Malaguti Spidermax GT 500, you need to loosen the screws that secure it to its housing on the left side of the han…
How to Replace the Exhaust on a Malaguti Spidermax GT 500?
How to Replace the Exhaust on a Malaguti Spidermax GT 500?
Spidermax Gt 500 To replace the exhaust on a Malaguti Spidermax GT 500, start by removing the old exhaust, loosening the connecting clamp, and unscrewing the bolts th…

How to Remove and Install the Rear Wheel of the Triumph Tiger 900

This guide briefly provides the instructions to remove and install the rear wheel of the Triumph Tiger 900. First, place your motorcycle on the centre stand and begin loosening the central bolt of the rear wheel using a socket spanner with an extension; then disconnect the brake caliper and the drive chain, gently removing the wheel, as shown in the video. At this point, if necessary, replace the tyre, sprocket, or rear brake disc; apply the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos