Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the ECU of the Malaguti Spidermax GT 500?

Model: Malaguti Spidermax Gt 500
Part: Warning light – error code

Video tutorial

To reset the ECU of the Malaguti Spidermax GT 500, open the fuse box of the vehicle: this is located in the lower left fairing relative to the steering. Once the cover of the box has been removed, you can pull out the fourth fuse from the bottom and keep it disconnected for about five minutes.

After the old fuse has been removed, wait and then reinsert it: once it is inserted, turn on the ignition to verify that all errors stored in the ECU have been reset.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Checking Valve Clearance on Malaguti SpiderMax GT 500
Checking Valve Clearance on Malaguti SpiderMax GT 500
Spidermax Gt 500 In this video tutorial, you will see instructions on how to check the valve clearance of a Malaguti SpiderMax GT 500. First, open the seat and remove…
How to Replace the Exhaust on a Malaguti Spidermax GT 500
How to Replace the Exhaust on a Malaguti Spidermax GT 500
Spidermax Gt 500 To replace the exhaust on a Malaguti Spidermax GT 500, first remove the old exhaust by loosening the clamp and unscrewing the bolts that secure it to…
How to replace the transmission on a Malaguti Spidermax GT 500?
How to replace the transmission on a Malaguti Spidermax GT 500?
Spidermax Gt 500 To replace the transmission on the Malaguti Spidermax GT 500, loosen the bolts securing the cover on the left side of the rear wheel. Once the cover …

How to Replace the Clutch on the KTM XCF 450?

To replace the clutch on the KTM XCF 450, loosen the screws securing the corresponding cover located on the right side of the bike. Once the cover screws are loosened, you can remove it to access the underlying clutch. By unscrewing the corresponding bolts, you can extract all the discs that make up the clutch, allowing you to insert the new replacement parts. After inserting them, secure them with the corresponding screws and cover everything back up with the cover.

Watch the video!


by ScegliAuto

More videos