Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Malaguti
  4. : Madison S200
To replace the exhaust of the Malaguti Madison S200, loosen the screws that secure it to the respective supports located on the right side of the bike near the rear wheel. Once these screws are loosened, proceed to widen the ring that connects the exhaust to the exhaust manifold, allowing for complete removal. After the old exhaust has been removed, insert the new one, securing it with the appropriate supports and connecting it to the exhaust pipe with its ring.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Madison 250 To replace the exhaust on the Malaguti Madison 250, you will need to loosen the screws that hold it to the appropriate supports, which will be locate…
Madison 250 In order to replace the exhaust on the Malaguti Madison RS250, you need to loosen the screws that secure the exhaust terminal supports, located on th…
Madison 250 It will be possible to replace the exhaust pipe of the Malaguti Madison 250E by loosening the screws that fix the exhaust terminal to its housing, on…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos