Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. A Star
    4. : Checks and maintenance

Maruti A Star - Checks and maintenance

Maruti A Star (2008-2014 / MK 1)
How do you replace the steering box of the Maruti A-Star?
In order to replace the steering box of the Maruti A-Star, you need to lift the car with a jack or a lift so that the front wheels are not in contact with the …read all…
Posted on 9 July 2023 by ScegliAuto
Maruti A Star (2008-2014 / MK 1)
How to change the oil and filter on the Maruti A Star
If we want to proceed with the replacement of the engine oil and filter on this car we will find the instructions given below this description. First you need …read all…
Posted on 26 April 2023 by ScegliAuto
Maruti A Star (2008-2014 / MK 1)
How do you replace the gas springs in the trunk of the Maruti A-Star?
To be able to replace the gas springs of the rear door of the Maruti A-Star you have to open the tailgate, so that you have access to the internal components …read all…
Posted on 25 April 2024 by ScegliAuto
Car stereo (3) Spark plugs (1) Checks and maintenance (3) Air filter (1) Cabin air filter (2) Brake pads (1) Fuse box (1) Outside rearview mirror (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos