Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gas Springs on the Trunk of a Maruti A-Star?

Model: Maruti A Star MK 1 - Years 2008-2014
Part: Checks and maintenance

To replace the gas springs on the rear hatch of a Maruti A-Star, open the hatch to access the internal components. Here, you can access the gas springs, which can be removed by unscrewing the bolts that secure them at the top and bottom. Once these bolts are removed, slide the old springs out from the inside of the hatch and insert the new replacement parts. Secure them with screws, ensuring the hatch opens and closes properly.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Steering Box in a Maruti A-Star?
How to Replace the Steering Box in a Maruti A-Star?
Maruti A Star (2008-2014 / MK 1) .. To replace the steering box in a Maruti A-Star, lift the vehicle with a jack or lift so that the front wheels are off the ground: then, completely.. …
How to Replace the 80 Amp Main Fuse on a Maruti A Star
How to Replace the 80 Amp Main Fuse on a Maruti A Star
Maruti A Star (2008-2014 / MK 1) .. main fuse of the electrical system on a Maruti A Star, which is the 80 Amp fuse. This fuse is located on the positive terminal of the battery, protected.. …
How to Replace the Cabin Fan Resistor on a Maruti A Star?
How to Replace the Cabin Fan Resistor on a Maruti A Star?
Maruti A Star (2008-2014 / MK 1) .. To replace the cabin fan resistor on a Maruti A Star, open the glove compartment on the passenger side by releasing the internal pins to remove it. Once.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos