Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Ertiga
  6. : Checks and maintenance

Maruti Ertiga - Checks and maintenance

Checks And Maintenance Maruti Ertiga (2018-2025 / mk 2)

Maruti Ertiga (2018-2025 / MK 2)
Where is the OBD2 port located in the Suzuki Ertiga 2?

To locate the OBD2 port inside the cabin of your Suzuki Ertiga second series by yourself, simply follow the steps described. First, get into the car and reach …Read all…
Posted on 19 June 2025 by ScegliAuto

Airbag (1) Shocks (1) Battery (2) Spark plugs (1) Key (4) Checks and maintenance (1) Tail light (1) Air filter (4) Cabin air filter (2) Accessory kit (1) Interior dome light bulb (2) Engine oil (2) Clock (14) Door trim panel (1) Brake pads (1) Fuse box (3) Warning light – error code (1)

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos