Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Maruti Ertiga - Key

Maruti Ertiga (2018-2024 / MK 2)
How to convert SUZUKI ERTIGA Flip key.
As shown in the video, the second spare key of the Suzuki Maruti Ertiga is converted from a fixed and non-removable key to one similar to the main key. After …read all…
Posted on 29 April 2023 by ScegliAuto
Maruti Ertiga (2018-2024 / MK 2)
How to change the battery of the Maruti Ertiga key
If we have to replace the battery in the remote control key of our car because it is no longer able to open and unlock the doors, we will find instructions on …read all…
Posted on 27 May 2023 by ScegliAuto
Maruti Ertiga (2018-2024 / MK 2)
How to change an old key with a remote control key for the Maruti Ertiga?
If we still have the old mechanical key to open our Maruti Ertiga we can convert it into a new remote control after purchasing the appropriate body. To do this …read all…
Posted on 3 July 2022 by ScegliAuto
Maruti Ertiga (2018-2024 / MK 2)
How to replace the Maruti Ertiga key battery
The following are the simple operations necessary to replace the car key battery: remove the key protection cover and extract the emergency key, use a …read all…
Posted on 1 May 2024 by ScegliAuto
Airbags (1) Shock absorbers (1) Battery (1) Spark plugs (1) Key (4) -board computer (3) Checks and maintenance (2) Tail light (1) Air filter (4) Cabin air filter (2) Accessory Kit (1) Interior lights ceiling light bulb (2) Engine oil (2) Door panel (1) Brake pads (1) Instrument cluster (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos