Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Ertiga
  6. : How to convert SUZUKI ERTIGA Flip key.

Maruti Ertiga - Video tutorial

Model: Maruti Ertiga MK 2 - Years 2018-2024
Part: Key
Operation: How to convert SUZUKI ERTIGA Flip key.

As shown in the video, the second spare key of the Suzuki Maruti Ertiga is converted from a fixed and non-removable key to one similar to the main key. After purchasing the key casing from the manufacturer, we proceed to unscrew the casing from our original key that contains the transponder with the controls that allow us to open and close the car and start the engine. We also unscrew and open the casing of the newly purchased key that has not yet been threaded. We then position the transponder in the new housing and screw the casing back together. At this point, we take the new key to be threaded.


Posted on 29 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos