Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Ertiga
    4. : Air filter

Maruti Ertiga - Air filter

Maruti Ertiga (2018-2024 / MK 2)
How to change the air filter on the Maruti Ertiga.
Do we want to proceed with replacing the air filter on this car model ourselves? We can use the images in the video and the description below where we have …read all…
Posted on 20 June 2023 by ScegliAuto
Maruti Ertiga (2018-2024 / MK 2)
How to replace the air filter of Maruti Ertiga.
If we want to proceed with the replacement of the air filter in this car model, we will find all the information and steps to be taken in the description that …read all…
Posted on 9 June 2023 by ScegliAuto
Maruti Ertiga (2018-2024 / MK 2)
How to replace the cabin and engine air filter on Maruti Ertiga
How to replace the cabin air filter - otherwise known as pollen - in the Maruti Ertiga. The filter compartment is behind the glovebox. We must therefore empty …read all…
Posted on 31 July 2022 by ScegliAuto
Maruti Ertiga (2018-2024 / MK 2)
How to replace the air filter on Maruti Ertiga 2
If you own a Maruti Ertiga Mk2 and want to replace the engine air filter in order to preserve the performance and reliability of the latter, all you have to do …read all…
Posted on 30 July 2022 by ScegliAuto
Airbags (1) Shock absorbers (1) Battery (1) Spark plugs (1) Key (4) -board computer (3) Checks and maintenance (2) Tail light (1) Air filter (4) Cabin air filter (2) Accessory Kit (1) Interior lights ceiling light bulb (2) Engine oil (2) Door panel (1) Brake pads (1) Instrument cluster (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos