Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Wagon R Stingray
    4. : Cabin air filter

Maruti Wagon R Stingray - Cabin air filter

Maruti Wagon R Stingray (2019-2024 / MK 3)
How to replace the cabin filter in Suzuki Wagon R Stingray?
In this tutorial we can see how to replace the cabin filter in the Suzuki Wagon R Stingray, a very simple and fast operation. First of all, let's go inside the …read all…
Posted on 16 May 2022 by ScegliAuto
Maruti Wagon R Stingray (2019-2024 / MK 3)
How do you replace the cabin filter on the Maruti Wagon R Stingray?
In order to replace the cabin filter of the Maruti Wagon R Stingray, you have to open the glove box located on the passenger side, so that the internal pins …read all…
Posted on 9 May 2024 by ScegliAuto
Maruti Wagon R Stingray (2010-2017 / MK 2)
How to replace the cabin filter in the Maruti Wagon R Stingray?
As we can see in this tutorial, replacing the cabin air filter in the Maruti Wagon R Stingray is a very simple and quick operation. To do this we will not need …read all…
Posted on 5 May 2024 by ScegliAuto
Battery (1) Key (2) -board computer (1) Air filter (4) Cabin air filter (3) Petrol filter (1) Headlight bulb (1) Engine oil (1) Passenger compartment heating radiator (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos