Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Maruti Wagon R Stingray - Air filter

Maruti Wagon R Stingray (2019-2024 / MK 3)
How to change the air filter on the Maruti Wagon R Stingray
If we want to proceed with the replacement of the engine air filter on this car model of the Japanese company, we have reported the information on how to …read all…
Posted on 27 May 2023 by ScegliAuto
Maruti Wagon R Stingray (2010-2017 / MK 2)
How to replace the air filter on the Maruti Wagon R Stingray
If we want to try our hand at replacing the air filter on this car on our own, the information provided below and also the images in the video may be useful. …read all…
Posted on 13 April 2023 by ScegliAuto
Maruti Wagon R Stingray (2019-2024 / MK 3)
How to replace the air filter on the Maruti Wagon
If we intend to replace the air filter on this car model in DIY mode, in the description that is given below we have collected all the information necessary …read all…
Posted on 23 July 2022 by ScegliAuto
Maruti Wagon R Stingray (2010-2017 / MK 2)
How do you replace the air filter on the Maruti Wagon R Stingray?
In order to replace the air filter of the Maruti Wagon R Stingray you have to go to open the hood so that you can have access to the components inside the …read all…
Posted on 9 May 2024 by ScegliAuto
Battery (1) Key (2) -board computer (1) Air filter (4) Cabin air filter (3) Petrol filter (1) Headlight bulb (1) Engine oil (1) Passenger compartment heating radiator (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos