Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Maruti Wagon R Stingray

Model: Maruti Wagon R Stingray MK 2 - Years 2010-2017
Part: Air filter

If you want to independently replace the air filter on this vehicle, the information below and the images in the video will be helpful. First, open the hood. The filter is contained in the box located above the engine. Remove the dipstick and lift the engine cover. The filter housing cover is located at the back near the windshield; you can remove it and either clean it or replace it with a compatible accessory that meets the vehicle's specifications. After that, reposition the engine cover and reattach the filter housing cover, and you're finished.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Maruti Wagon R Stingray?
How to Replace the Air Filter on a Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2010-2017 / MK 2) To replace the air filter on a Maruti Wagon R Stingray, open the hood to access the components inside the engine compartment. In the center of the co…
How to Replace the Cabin Air Filter on a Maruti Wagon R Stingray?
How to Replace the Cabin Air Filter on a Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2019-2026 / MK 3) To replace the cabin air filter on a Maruti Wagon R Stingray, open the glove compartment located on the passenger side to release the internal clips …
How to Replace the Cabin Air Filter in the Maruti Wagon R Stingray?
How to Replace the Cabin Air Filter in the Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2010-2017 / MK 2) As shown in this tutorial, replacing the cabin air filter in the Maruti Wagon R Stingray is a very simple and quick task. You won't need any special …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos