Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Wagon R Stingray
    4. : How to replace the cabin filter in the Maruti Wagon R Stingray?

Maruti Wagon R Stingray - Video tutorial

Model: Maruti Wagon R Stingray MK 2 - Years 2010-2017
Part: Cabin air filter
Operation: How to replace the cabin filter in the Maruti Wagon R Stingray?

As we can see in this tutorial, replacing the cabin air filter in the Maruti Wagon R Stingray is a very simple and quick operation. To do this we will not need any particular tool, but only the right spare. Since the filter is located behind the glove box on the passenger side, we begin by removing the drawer by pressing the two corners inwards. Subsequently, we disengage the upper support, helping us, if necessary, with a flat-tipped screwdriver. At this point we can open the long rectangular door and proceed with the replacement of the filter, following the reverse procedure to reassemble everything.


Posted on 5 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos