Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Maxus G10

Model: Maxus G10 MK 1 - Years 2014-2024
Part: Air filter

To replace the air filter on the car, it is necessary to proceed as follows: open the bonnet and locate the box containing the filter on the right side of the engine compartment. Proceed to unscrew the fixing screws of the filter cover and lift it. At that point we will have access to the compartment containing the filter itself and we can proceed with its removal. Take the new filter (always check the type of filter that is compatible with the car specifications) and place it in the housing. Finally, reposition the cover and tighten the fixing screws.

Posted on 15 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel filter in the Maxus G10 van?
How to replace the fuel filter in the Maxus G10 van?
Maxus G10 (2014-2024 / MK 1) In this tutorial we can see how to replace the diesel filter in the Maxus G10 van, an extremely simple and fast operation. First of all, make sure th…
How to replace the pollen filter of the Maxus G10
How to replace the pollen filter of the Maxus G10
Maxus G10 (2014-2024 / MK 1) Let's find out today how to remove and replace the cabin air filter or the pollen filter of the Maxus G10. First of all we get on board the car, on t…
How is the service done on the Maxus G10?
How is the service done on the Maxus G10?
Maxus G10 (2014-2024 / MK 1) To be able to service the Maxus G10 you have to go and lift the car, so that you can unscrew the oil drain plug. All the oil that escapes must be col…

Other guides you may be interested in

How to Replace the Brake Pads on a BMW X3

For this operation, you will need to remove the wheel where you will perform the replacement, so it will be convenient to lift your vehicle and place it on jack stands; this way, you will work much more comfortably. To remove the spring that holds the front pads, use a flathead screwdriver. Now, unscrew the bolts that secure the piston to the pads, then remove it, giving you access to both pads that brake the rotor. Of course, repeat the same steps on the other side if the same replacements are needed.

Watch the video!


by ScegliAuto

More videos