Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the alternator belt of the Maxus T60

Model: Maxus T60 MK 1 - Years 2016-2024
Part: V-belt

Let's see in this guide how to disassemble and replace the alternator belt of the Maxus T60, following the instructions below. First of all, we open the bonnet of our car and start unscrewing the screw of our belt tensioner, using a Phillips or socket wrench; after that we go to remove the old belt, as shown in the video. At this point we install the new alternator belt, as well as the original one; insert it correctly between the various pulleys and finally tighten the belt tensioner!

Posted on 11 August 2022 by ScegliAuto

Video tutorial

Related tutorials

Removal of the alternator belt on a Maxus T60
Removal of the alternator belt on a Maxus T60
Maxus T60 (2016-2024 / MK 1) In this video we see how to change the alternator belt and the alternator itself on a Maxus T60: first, we need to remove the belt from the tensioner…
Guide to replacing the timing belt of the MG T60 - Maxus T60.
Guide to replacing the timing belt of the MG T60 - Maxus T60.
Maxus T60 (2016-2024 / MK 1) In this guide, we will see the procedure that will allow us to disassemble and replace the timing belt of the Maxus T60 and MG T60. First, we open th…
How to install the Snorkel kit on Maxus T60 - LDV T60
How to install the Snorkel kit on Maxus T60 - LDV T60
Maxus T60 (2016-2024 / MK 1) Today we will see, in this short and simple guide, how to install the Snorkel kit on the Maxus T60, but also on the lDV T60. First of all we open the…

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos