Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the alternator belt on a Maxus T60

Model: Maxus T60 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: V-belt

Video tutorial

In this video we see how to change the alternator belt and the alternator itself on a Maxus T60: first, we need to remove the belt from the tensioner pulleys, which are the ones that create the tension of the belt, then we need to disconnect the electrical connector that connects the alternator to the car's electrical system.

There are two bolts that hold the alternator in place.

We also need to disconnect the two intercooler pipes; it is a difficult operation because the space is very limited, and the alternator is quite bulky. The whole operation takes about an hour of work.


Posted on 9 October 2025 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the MG T60 - Maxus T60
Guide to Replacing the Timing Belt on the MG T60 - Maxus T60
Maxus T60 (2016-2024 / MK 1) In this guide, we will look at the procedure to remove and replace the timing belt on the Maxus T60 and MG T60. First, open the hood of your car and …
How to Replace the Alternator Belt on the Maxus T60
How to Replace the Alternator Belt on the Maxus T60
Maxus T60 (2016-2024 / MK 1) In this guide, see how to remove and replace the alternator belt on the Maxus T60 by following the instructions below. First, open the hood of your v…
How to Install the Front Tow Hitch on a Maxus T60
Maxus T60 (2016-2024 / MK 1) Here are the steps to install the front tow hitch on a Maxus T60, as well as on an LDV T60. First, move to the front and remove the plastic cover und…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos