Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. : V90

How to Change the Engine Oil on a Maxus Camper

Model: Maxus V90 MK 1 - Years 2019-2026
Part: Engine oil

If you plan to change the engine oil and its filter yourself, follow these instructions for your vehicle: Open the hood and unscrew the oil filler cap. Lift the vehicle and locate the oil drain plug. Unscrew it and place an oil catch pan underneath to collect the used oil, waiting for it to fully drain. Then, replace the oil drain plug and return to the engine bay to locate and unscrew the oil filter. Obtain a new filter, replace the filter cap gasket, and reinstall it. At this point, you can add new oil and check the level with the dipstick, which should be between the minimum and maximum marks.

Updated on 28 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace Engine Oil and Oil Filter on the Maxus T60
Maxus T60 (2016-2024 / MK 1) This brief guide will illustrate the main steps to perform routine maintenance by replacing the engine oil and oil filter on the Maxus T60. First, li…
How to Replace the Transmission Fluid in the Maxus T60?
Maxus T60 (2016-2024 / MK 1) To replace the transmission fluid in the Maxus T60, you need to completely remove the transmission from the underside of the vehicle. After the remov…
How to reset the AdBlue warning light in the Maxus Deliver 9 van?
How to reset the AdBlue warning light in the Maxus Deliver 9 van?
Maxus Maxus Various If the AdBlue warning light in the instrument panel of our Maxus Deliver 9 van has turned on, it means that the pollution control system liquid has r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos