Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. G10
    4. : Where is the fuse box located in the Maxus G10?

Maxus G10 - Video tutorial

Model: Maxus G10 MK 1 - Years 2014-2023
Part: Fuse box
Operation: Where is the fuse box located in the Maxus G10?

If you are curious to know the exact location of the fuse box in your Maxus G10, all you need to do is read the instructions in the following mini guide. First, make sure you have completely turned off your Maxus G10 and disconnected the battery (only in case of maintenance or subsequent fuse replacement). Then, reach the driver's side and locate the small compartment at the end of the dashboard. Open it completely and proceed with its removal by acting on the side hooks. Once you have done this, just behind it, you will have access to the car's fuses.


Posted on 17 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos