Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 3
    4. : Fog lights

Mazda Cx 3 - Fog lights

Mazda Cx 3 (2015-2023 / MK 1)
How do you adjust the height of the fog lights on the Mazda CX3?
In this video, we will see how to adjust the height of the fog lights on a Mazda CX3. We will need an 8mm wrench, a ratchet, and we remove the screws located …read all…
Posted on 10 December 2023 by ScegliAuto
Battery (3) Key (7) -board computer (5) Checks and maintenance (11) Dashboard (1) Fog lights (1) Particulate filter (1) Air filter (1) Diesel filter (2) Light bulb (1) Engine oil (2) Rear bumper (1) Tires (1) Instrument cluster (1) Fuse box (2) Seat (1) Outside rearview mirror (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos