Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Height of the Fog Lights on a Mazda CX3

Model: Mazda Cx 3 MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fog lights

Video tutorial

In this video, you will see how to adjust the height of the fog lights on a Mazda CX3. Take an 8 mm spanner and a ratchet, and remove the screws located under the vehicle near the fog lights. This will lower the cover, allowing access to the fog light.

Behind it, there is a plastic screw, which appears white in the video, and with a 10 mm socket, you can adjust it as follows: turning it left (loosening) raises the fog light, while turning it right (tightening) lowers it. Then, reattach the four screws and proceed to the other side.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Mazda CX3
How to Reset the "Service" Light on a Mazda CX3
Mazda Cx 3 (2015-2023 / MK 1) Before you can start, sit in the driver’s seat of your Mazda CX3 and activate the instrument panel. Begin by selecting and confirming the "Applicatio…
How to Replace the Key Battery on the Mazda CX-3
How to Replace the Key Battery on the Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) Replacing the battery in your Mazda CX-3 key is very simple, and with this mini guide, you will complete the entire operation in just a few seconds. …
How to reset the service indicator on the Mazda CX3
How to reset the service indicator on the Mazda CX3
Mazda Cx 3 (2015-2023 / MK 1) To properly and safely complete the manual reset of the service light on your Mazda CX3, you simply need to follow the procedure described in our new…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos