Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the fog lights of the Mazda CX-5?

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Fog lights

In the video tutorial provided, we will see the step-by-step procedure to adjust the fog lights of the Mazda CX-5. First, remove the front wheel arches to access the aforementioned fog lights, using a flathead screwdriver to release the retaining clips. After this, proceed to adjust the beam height using the adjustment screw located next to the bulb holder, which allows you to raise or lower the projected light by turning it clockwise or counterclockwise. It is recommended to position the vehicle in front of a white wall.

Posted on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How the Lights Work on a Mazda CX-5
How the Lights Work on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) In today's video, you will see how the lights work on the Mazda CX-5. Locate the left lever that controls their operation. The initial position is of…
How to Replace the Front Fog Light Bulb of the Mazda CX-5 MK1
How to Replace the Front Fog Light Bulb of the Mazda CX-5 MK1
Mazda CX-5 (2012-2017 / MK 1, KE) Today, in this video tutorial, you will see how to remove and replace the front fog light bulb of the first series Mazda CX-5. First, lift the vehicl…
How to Replace the Interior Light Bulb in a Mazda CX-5?
How to Replace the Interior Light Bulb in a Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) To replace the interior light bulb in a Mazda CX-5, use a flat object as a lever to detach the light fitting located behind the rear-view mirror. Onc…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos