Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulb of the Mazda CX-5 MK1

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Fog lights

See other generations:
Video tutorial

Today, in this video tutorial, you will see how to remove and replace the front fog light bulb of the first series Mazda CX-5. First, lift the vehicle and remove the lower plastic panel by taking out the fixing screws; then disconnect the electrical connector of the fog light bulb to remove it from the unit, as shown in the video.

At this point, replace the bulb with a new one of the correct type (in this case, an H11); insert it correctly into the headlamp and connect its electrical cable, then reattach the lower plastic!


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on the Mazda CX-5?
How to Replace the Rear Light Bulb on the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the rear light bulb on the Mazda CX-5, open the tailgate of the boot and detach the side cover corresponding to the bulb that needs replac…
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial, you will learn how to replace the rear headlamp bulbs on a Mazda CX-5, a very simple and quick operation. Before proceeding, ensure…
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) As shown in this tutorial, replacing the rear headlamp bulbs on a Mazda CX-5 is an extremely simple and quick task. Before proceeding, ensure the key…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos