Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Tail light bulb

As shown in this tutorial, replacing the rear headlamp bulbs on a Mazda CX-5 is an extremely simple and quick task. Before proceeding, ensure the key is not inserted. Start by opening the boot, then remove the small panel located on the inner edge of the headlamp and unscrew the two screws underneath it. Once done, grasp the lamp unit, pull it towards you, and extract it from the bodywork. To replace a faulty bulb, remove it from the housing by turning it slightly anti-clockwise and disconnect it from the connector.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) .. In this tutorial, you will learn how to replace the rear headlamp bulbs on a Mazda CX-5, a very simple and quick operation. Before proceeding,.. …
How to Replace the Rear Light Bulb on a Mazda CX-5
How to Replace the Rear Light Bulb on a Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) In today's video tutorial, we will see how to remove and replace the rear light bulb on a Mazda CX-5, following these simple and quick steps. First, …
How to Replace the Front Headlight Bulbs in a Mazda CX-5?
How to Replace the Front Headlight Bulbs in a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) Replacing the front headlight bulbs in a Mazda CX-5 is a very simple and quick task. Let's see how to proceed in this video. Starting with the positi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos