Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the rear headlamp bulbs on a Mazda CX-5, a very simple and quick operation. Before proceeding, ensure that the key is not in the ignition for safety.

Start by opening the boot, then locate the small panel at the back of the headlamp in question. Once opened, use a screwdriver if necessary to locate the bulb you wish to replace, turn it counterclockwise, and remove it from the housing.

Finally, disconnect the connector and fit the replacement by following the reverse procedure.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

Replacing the rear light of the Mazda CX-5
Replacing the rear light of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Today's guide will show you how to remove and replace the rear light of the Mazda CX-5, following the instructions below. First, open the rear tailga…
How to Replace the Rear Light Bulb on a Mazda CX-5
How to Replace the Rear Light Bulb on a Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) In today's video tutorial, we will see how to remove and replace the rear light bulb on a Mazda CX-5, following these simple and quick steps. First, …
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) As shown in this tutorial, replacing the rear headlamp bulbs on a Mazda CX-5 is an extremely simple and quick task. Before proceeding, ensure the key…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos