Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Mazda CX-5

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Tail light bulb

In today's video tutorial, we will see how to remove and replace the rear light bulb on a Mazda CX-5, following these simple and quick steps. First, open the tailgate and start unscrewing the screws securing the rear lights, which are located under the side plastic cover; to do this, use a cross-head screwdriver. At this point, remove the light and disconnect the electrical connector of the bulb to extract and remove it; then replace it with a new one of the correct type. Now reassemble the bulbs and the rear light unit!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light Bulb on the Mazda CX-5
Replacing the Rear Light Bulb on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Let's see in this guide how to remove and replace the rear light bulb on the Mazda CX-5, following the instructions below. First, open the boot lid a…
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) As shown in this tutorial, replacing the rear headlamp bulbs on a Mazda CX-5 is an extremely simple and quick task. Before proceeding, ensure the key…
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial, you will learn how to replace the rear headlamp bulbs on a Mazda CX-5, a very simple and quick operation. Before proceeding, ensure…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos