Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the indicator bulb of the front headlamp of the Mazda CX-5

Model: Mazda CX-5 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Light bulb

See other generations:
Video tutorial

Today, we will see the instructions that will allow us to remove and replace the indicator bulb of the front headlamp of the Mazda CX-5. First, open the bonnet of the vehicle and start by rotating the bulb holder of the indicator found behind the headlamp unit to remove it; disconnect the bulb from the holder, as illustrated in the video.

At this point, install the new indicator bulb, ensuring it is the correct type and has the same fitting; reassemble and connect the bulb holder to the headlamp unit, checking the operation of the indicator light.


Posted on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Mazda CX-5?
How to Replace the Front Headlight Bulb of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the front headlight bulb of the Mazda CX-5, open the bonnet to access the rear of the headlight that contains the bulb to be replaced. Her…
How to Replace the Front Headlamp Bulb on a Mazda CX-5
How to Replace the Front Headlamp Bulb on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the front headlamp bulb on a Mazda CX-5, open the bonnet to access the screws securing the headlamp assembly in place: once these screws a…
How to Replace the Front Headlamp Bulb on a Mazda CX-5
How to Replace the Front Headlamp Bulb on a Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) To replace the front headlamp bulb on a Mazda CX-5, unscrew the bolts securing the wheel arch liner of the front wheel corresponding to the bulb bein…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos