Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Mazda CX-5

Model: Mazda CX-5 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlamp bulb on a Mazda CX-5, unscrew the bolts securing the wheel arch liner of the front wheel corresponding to the bulb being replaced. Once the bolts are loosened, detach the wheel arch liner to access the components inside.

Here, you will find the connector attached to the headlamp, which needs to be removed. After removal, pull out the bulb to be replaced and insert a new one. Connect it to the connector, place it back into the headlamp, and cover everything with the relevant wheel arch panel.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Mazda CX-5?
How to Replace the Front Headlight Bulb of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the front headlight bulb of the Mazda CX-5, open the bonnet to access the rear of the headlight that contains the bulb to be replaced. Her…
How to Replace the Front Headlamp Bulb on the Mazda CX-5
How to Replace the Front Headlamp Bulb on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) To replace the front headlamp bulb on your Mazda CX-5 Series 2 independently, follow the steps outlined in this guide. First, ensure the car is compl…
How to Replace the Front Headlamp Bulb of the Mazda CX-5
How to Replace the Front Headlamp Bulb of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Below are the instructions for removing and replacing the dipped and main beam bulb of the front headlamp of the Mazda CX-5. First, open the front bo…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos