Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb of the Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

Below are the instructions for removing and replacing the dipped and main beam bulb of the front headlamp of the Mazda CX-5. First, open the front bonnet of the vehicle and start by disconnecting the bulb connector, then rotate the bulb holder to remove it along with the bulb, as illustrated in the video.

At this point, replace the bulb with a new one of the correct type and with the same fitting; secure it onto the bulb holder and connect it, then check its operation, following the video tutorial to the end!


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Mazda CX-5
How to Replace the Front Headlamp Bulb on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) To replace the front headlamp bulb on your Mazda CX-5 Series 2 independently, follow the steps outlined in this guide. First, ensure the car is compl…
How to Replace the Front Fog Light Bulb of the Mazda CX-5 MK1
How to Replace the Front Fog Light Bulb of the Mazda CX-5 MK1
Mazda CX-5 (2012-2017 / MK 1, KE) Today, in this video tutorial, you will see how to remove and replace the front fog light bulb of the first series Mazda CX-5. First, lift the vehicl…
How to Replace the Interior Light Bulb in a Mazda CX-5?
How to Replace the Interior Light Bulb in a Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) To replace the interior light bulb in a Mazda CX-5, use a flat object as a lever to detach the light fitting located behind the rear-view mirror. Onc…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos