Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Mazda CX-5

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Headlight bulb

To replace the front headlamp bulb on your Mazda CX-5 Series 2 independently, follow the steps outlined in this guide. First, ensure the car is completely off, then go outside and lift the bonnet. Position yourself in front of the headlamp that needs replacing and remove the bulb holder by turning it anti-clockwise. Once done, replace the faulty bulb with a new one and reassemble everything correctly. Finally, close the bonnet of your Mazda CX-5.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb of the Mazda CX-5
How to Replace the Front Headlamp Bulb of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Below are the instructions for removing and replacing the dipped and main beam bulb of the front headlamp of the Mazda CX-5. First, open the front bo…
How to Replace the Front Headlight Bulb of the Mazda CX-5?
How to Replace the Front Headlight Bulb of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the front headlight bulb of the Mazda CX-5, open the bonnet to access the rear of the headlight that contains the bulb to be replaced. Her…
How to Replace the Front Headlamp Bulb on a Mazda CX-5
How to Replace the Front Headlamp Bulb on a Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) To replace the front headlamp bulb on a Mazda CX-5, unscrew the bolts securing the wheel arch liner of the front wheel corresponding to the bulb bein…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos