Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the rear light of the Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

Today's guide will show you how to remove and replace the rear light of the Mazda CX-5, following the instructions below. First, open the rear tailgate and start by removing the plastic cover located on the side; then unscrew the internal fixing screws, removing the light from the outside (disconnecting the electrical connector of the lights), as illustrated in the video.

At this point, replace the bulbs if necessary or the entire rear light, applying the reverse procedure for reassembly!


Updated on 20 August 2026 by ScegliAuto


Related tutorials

Mazda CX-5 (2017-2024 / MK 2) Let's see in this guide how to remove and replace the rear light bulb on the Mazda CX-5, following the instructions below. First, open the boot lid a…
Mazda CX-5 (2017-2024 / MK 2) Briefly follow the instructions to remove and replace the rear light and all its bulbs on the Mazda CX-5. First, open the boot and start by removing …
Mazda CX-5 (2012-2017 / MK 1, KE) As shown in this tutorial, replacing the rear headlamp bulbs on a Mazda CX-5 is an extremely simple and quick task. Before proceeding, ensure the key…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos