Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light of the Mazda CX-5

Model: Mazda CX-5 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tail light

See other generations:
Video tutorial

Briefly follow the instructions to remove and replace the rear light and all its bulbs on the Mazda CX-5. First, open the boot and start by removing the plastic cover of the light located on the side; then unscrew the two fixing screws, disconnecting and removing the rear light as shown in the video.

At this point, disconnect the electrical connector of the bulbs, replacing them if necessary; then refit the new rear light by applying the reverse procedure of disassembly!


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to disassemble the rear headlight of the 2019 Mazda CX 5
How to disassemble the rear headlight of the 2019 Mazda CX 5
Mazda CX-5 (2017-2024 / MK 2) Disassembling the rear headlight of your Mazda CX 5 (2019) is really very simple and in the following guide you will find all the useful indications …
Replacing the rear light of the Mazda CX-5
Replacing the rear light of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Today's guide will show you how to remove and replace the rear light of the Mazda CX-5, following the instructions below. First, open the rear tailga…
Replacing the Rear Light Bulb on the Mazda CX-5
Replacing the Rear Light Bulb on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Let's see in this guide how to remove and replace the rear light bulb on the Mazda CX-5, following the instructions below. First, open the boot lid a…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos