Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the 2019 Mazda CX 5

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Tail light

Disassembling the rear headlight of your Mazda CX 5 (2019) is really very simple and in the following guide you will find all the useful indications so that you can carry out the operation without difficulty and safely. First of all, reach the rear area of the vehicle and lift the hood completely, then remove the small plastic cover located next to the headlight you want to remove. After removing the cover in question, locate the screws and unscrew them with a battery-powered screwdriver or a normal Phillips screwdriver. Finally, disconnect the headlight's electrical cable and complete the removal of the headlight.

Posted on 30 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Mazda CX-5?
How to Replace the Front Headlight Bulb of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the front headlight bulb of the Mazda CX-5, open the bonnet to access the rear of the headlight that contains the bulb to be replaced. Her…
Disassembly of the rear seat of the Mazda CX-5.
Disassembly of the rear seat of the Mazda CX-5.
Mazda CX-5 (2017-2024 / MK 2) The instructions in this guide will show us how to disassemble and remove the rear seat of the Mazda CX-5. First, let's open the rear doors of the ve…
How to Replace the Front Headlamp Bulb on the Mazda CX-5
How to Replace the Front Headlamp Bulb on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) To replace the front headlamp bulb on your Mazda CX-5 Series 2 independently, follow the steps outlined in this guide. First, ensure the car is compl…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos