Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight of the Mazda CX-5 MK1

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Headlight

In this video, discover how to remove and replace the front headlight of the first series Mazda CX-5 in simple steps. First, open the bonnet and start by unfastening the front bumper from the sides; to do this, remove the various plastic clips found above and below the bumper, then unscrew the screws located on both sides of the wheel arches, as illustrated in the video. At this point, unclip the bumper from the sides and unscrew the screws securing the front headlight; disconnect the electrical connector of the bulbs to remove it and replace it with the new one!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light Bulb on the Mazda CX-5
Replacing the Rear Light Bulb on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Let's see in this guide how to remove and replace the rear light bulb on the Mazda CX-5, following the instructions below. First, open the boot lid a…
How to Remove the Front Bumper of a Mazda CX5 Mk1
How to Remove the Front Bumper of a Mazda CX5 Mk1
Mazda CX-5 (2012-2017 / MK 1, KE) .. how to remove the front bumper of the Mazda CX5 Mk1. The first step is to remove the plastic cover of the engine bay by detaching the plastic clips... …
How to Replace the Front Headlamp Bulb on a Mazda CX-5
How to Replace the Front Headlamp Bulb on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the front headlamp bulb on a Mazda CX-5, open the bonnet to access the screws securing the headlamp assembly in place: once these screws a…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos