Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery in a Mazda CX-5?

Model: Mazda CX-5 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

See other generations:
Video tutorial

Don't be afraid, replacing the battery is simple although it requires attention. The car must be turned off and parked on a flat surface.

I will guide you through the steps. Open the hood and locate the battery near the engine.

Using an Allen key or a wrench, disconnect the negative cable first, usually black, and then the positive cable, usually red. Remove the blocks holding the battery and lift it gently. Place the new battery, secure it, and reconnect the cables, starting with the positive one. Check everything, close the hood, and start the car to see if everything works.

If you don't feel comfortable doing it all by yourself, and it's understandable, contact a trusted electrician.


Posted on 5 March 2025 by ScegliAuto


Related tutorials

How to change the fuel filter on a Mazda CX5
How to change the fuel filter on a Mazda CX5
Mazda CX-5 (2017-2024 / MK 2) Let's see how to change the fuel filter on a Mazda CX-5: first of all, disconnect the negative pole of the battery, then remove the rear seat to acce…
Replacing the Key Fob Battery for the Mazda CX-5
Replacing the Key Fob Battery for the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Follow these simple steps to disassemble and replace the battery in the key fob for the Mazda CX-5. First, take your key fob and remove the physical …
Battery replacement for the Mazda CX-5
Battery replacement for the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Today's instructions will explain the procedure for disassembling and replacing the battery of the Mazda CX-5. First, we open the hood of the vehicle…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos