Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery of the key remote of the Mazda CX-5.

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Key

Following these brief and simple steps, we will see how to disassemble and replace the battery of the key remote for the Mazda CX-5. First, take the remote in hand and begin by removing the physical key from inside it and then the plastic back cover; then remove the battery cover to take it out of its compartment, as shown in the video. At this point, install the new battery, of the correct type (in this case a CR 2032 3V); insert it in the correct direction and finally check the functioning of the key and remote!

Posted on 19 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the key and replace the battery of the Mazda CX-5 remote control
How to disassemble the key and replace the battery of the Mazda CX-5 remote control
Mazda CX-5 (2012-2017 / MK 1, KE) Today's information will allow us to disassemble the key for replacing the battery of the Mazda CX-5 remote control. First, we take our remote contro…
Replacement of the Mazda CX-5 key fob battery.
Replacement of the Mazda CX-5 key fob battery.
Mazda CX-5 (2017-2024 / MK 2) Let's discover the necessary instructions in order to disassemble the remote control to replace its battery on the key of the Mazda CX-5, in simple s…
How to replace the battery of the Mazda CX-5 key remote control
How to replace the battery of the Mazda CX-5 key remote control
Mazda CX-5 (2017-2024 / MK 2) Today we will see how to disassemble and replace the battery of the remote key of the Mazda CX-5. First of all, we take our remote control and start …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos