Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Mazda Cx 9 - Key

Mazda Cx 9 (2016-2023 / TC)
How to replace key battery on Mazda CX 9
In this video we can see how it is possible to replace the key battery of the Mazda CX 9. The material needed for the replacement: a CR 2032 battery, a flat …read all…
Posted on 19 May 2023 by ScegliAuto
Mazda Cx 9 (2016-2023 / TC)
How to replace the key battery of the Mazda CX 9
In this our new mini guide dedicated to your new Mazda CX 9 we will find out how to correctly change the battery of the smart key. To complete the entire …read all…
Posted on 8 August 2022 by ScegliAuto
Mazda Cx 9 (2016-2023 / TC)
How to replace the key battery on the Mazda Cx 9
If we need to replace the battery in the key of this car, we will find useful information on what to do in the description given here. First we go to extract …read all…
Posted on 21 June 2022 by ScegliAuto
Car stereo (1) Battery (1) Spark plugs (1) Key (3) -board computer (7) Checks and maintenance (7) Brake discs (1) Air filter (2) Cabin air filter (2) Accessory Kit (1) Interior lights ceiling light bulb (1) License plate light (1) Engine oil (2) Door panel (1) Brake pads (2) Tires (1) Fuel pump (1) Instrument cluster (2) Fuse box (1) Outside rearview mirror (1) Windscreen wipers (1) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos