Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda Cx 9
    4. : Warning light – error code

Mazda Cx 9 - Warning light – error code

Warning Light – Error Code Mazda Cx 9 (2016-2024 / tc)

Mazda Cx 9 (2016-2024 / TC)
How do you reset the partial odometer of the Mazda CX-9?
In order to reset the partial odometer of the Mazda CX-9, you need to insert the ignition key into the corresponding slot: this way you will be able to …Read all…
Posted on 1 July 2024 by ScegliAuto
Mazda Cx 9 (2016-2024 / TC)
How to Reset the Service Light on a Mazda CX-9
In this video tutorial, you can see how to reset the service light on a 2021 Mazda CX-9 by following a few simple steps: the first thing to do is perform …Read all…
Posted on 14 August 2026 by ScegliAuto
Mazda Cx 9 (2016-2024 / TC)
How to Replace the Indicator Panel on the Mazda CX-9 Transmission?
To replace the indicator panel next to the transmission, you only need a flathead screwdriver or a similar non-sharp object. Use it to pry around the chrome …Read all…
Posted on 9 September 2026 by ScegliAuto
Car stereo (1) Battery (2) Spark plugs (1) Key (6) Checks and maintenance (1) Dashboard (1) Brake rotors (1) Air filter (2) Cabin air filter (2) Parking brake (1) Accessory kit (1) Headlight bulb (1) Interior dome light bulb (1) License plate light (1) Engine oil (2) Clock (1) Door trim panel (1) Brake pads (2) Fuel pump (2) Instrument cluster (1) Fuse box (12) Side mirror (3) Warning light – error code (3) (2) Tire pressure warning light (1) Service warning light (17) Fuel cap (1) Windshield wipers (1) Blower motor (1) Side window (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos