Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Panel on the Mazda CX-9 Transmission?

Model: Mazda Cx 9 TC - Years 2016-2024
Part: Warning light – error code

To replace the indicator panel next to the transmission, you only need a flathead screwdriver or a similar non-sharp object. Use it to pry around the chrome cover of the transmission and remove it by disengaging it from the snap mechanism. Similarly, detach the underlying plastic panel and lift it. Now you can remove the panel of interest, which is the indicator panel, by disengaging it and disconnecting it from the connector. Install the new one and close everything up by retracing the steps you took.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a 2011 Mazda CX-9
How to Replace the Cabin Air Filter in a 2011 Mazda CX-9
Mazda Cx 9 (2007-2015 / TB) With this guide, you will finally complete the replacement of the cabin air filter in your first-generation 2011 Mazda CX-9 correctly. First, turn of…
How to Replace the Battery in a Mazda CX-9?
How to Replace the Battery in a Mazda CX-9?
Mazda Cx 9 (2016-2024 / TC) To replace the battery in a Mazda CX-9, open the hood to access the components inside the engine compartment. The battery is located on the right sid…
How to Replace the Air Filter in the Mazda CX-9
How to Replace the Air Filter in the Mazda CX-9
Mazda Cx 9 (2016-2024 / TC) In today's video, we will see how to replace the air filter in the Mazda CX-9. First, let the vehicle cool down if it has been used to avoid unpleasa…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos