Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mpv
    4. : Accessory Kit

Mazda Mpv - Accessory Kit

Mazda Mpv (1999-2006 / LW)
Installation of the car radio Aux input adapter
To install the Aux input adapter for iPod, iPad and iPhone, the original car stereo must first be removed. Start by removing the plastic frame around the …read all…
Posted on 30 July 2023 by ScegliAuto
Mazda Mpv (1999-2006 / LW)
Disassembly of the light switch control levers
In order to remove the light switch control levers it is not necessary to remove the steering wheel and therefore the airbag; In fact, it is sufficient to …read all…
Posted on 18 July 2023 by ScegliAuto
Alternator (2) Car stereo (2) Arm (1) V-belt (1) Cabin air filter (1) Accessory Kit (2) Light bulb (1) Headlight bulb (1) Gear oil (1) Engine oil (2) Tires (1) Pump (2) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos