Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Light Switch Levers

Model: Mazda Mpv LW - Years 1999-2006
Part: Accessory kit

To disassemble the light switch levers, it is not necessary to remove the steering wheel and the airbag; it is sufficient to remove the cover shells by unscrewing the screws underneath and separating the two shells that are interlocked, taking care not to damage them (adjust the steering wheel all the way down to facilitate disassembly). At this point, disconnect the connector attached to the control lever, unscrew the two mounting screws (one upper and one lower) and extract the lever by sliding it out of its housing like a drawer. Repeat the same procedure to disassemble the other lever.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Car Radio Removal Instructions
Car Radio Removal Instructions
Mazda Mpv (1999-2006 / LW) To remove the car radio, you need to take off the trim surrounding it, which includes the air vents and the dashboard covering: adjust the steering w…
Removing and Replacing the Alternator
Removing and Replacing the Alternator
Mazda Mpv (1999-2006 / LW) This video shows how to remove or replace your alternator. First, lift the car and remove the front wheel on the driver's side, then undo the steerin…
Disassembly of the alternator of the Mazda MPV
Disassembly of the alternator of the Mazda MPV
Mazda Mpv (1988-1999 / LV) The following instructions will show us how to disassemble and replace the alternator of the Mazda MPV, in simple steps. First, we open the hood of t…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos