Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Car Radio Removal Instructions

Model: Mazda Mpv LW - Years 1999-2006
Part: Car stereo

To remove the car radio, you need to take off the trim surrounding it, which includes the air vents and the dashboard covering: adjust the steering wheel all the way down to facilitate removal, unscrew the fixing screws of the trim located on the upper edge of the dashboard, and unclip the plastic trim starting from the air vent to the left of the steering wheel and around the stereo. At this point, you can access the fixing screws of the car radio (two at the top and two at the bottom sides): simply unscrew them to extract it from its housing.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing an Aux Input Adapter for Car Radio
Installing an Aux Input Adapter for Car Radio
Mazda Mpv (1999-2006 / LW) To install the Aux input adapter for iPod, iPad, and iPhone, first remove the original car radio. Start by removing the plastic trim around the instr…
Installing a Newly Purchased Stereo
Installing a Newly Purchased Stereo
Mazda Mpv (1999-2006 / LW) To start, you will need three items: the new stereo, the plastic fascia where the radio will be inserted, and the radio itself. Begin at the dashboar…
Disassembly of Light Switch Levers
Disassembly of Light Switch Levers
Mazda Mpv (1999-2006 / LW) To disassemble the light switch levers, it is not necessary to remove the steering wheel and the airbag; it is sufficient to remove the cover shells …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos