Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Mazda 3?

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part:

Resetting the tyre warning light on the Mazda 3, as shown in the video available here, is very simple and quick, but before doing so, it is important to understand why the warning is active; it could be due to a flat or punctured tyre, so you must address the issue first. Once this is done, you are ready to turn off the warning: turn on the instrument panel and hold down the Set button located under the steering wheel on the left side, wait for the flashing to stop and the light to turn off, release the button and turn off the previously mentioned instrument panel. Operation completed, the vehicle is ready to be used safely.

Posted on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Mazda 3 tire pressure warning light?
How do you reset the Mazda 3 tire pressure warning light?
Mazda 3 (2013-2019 / BN, BM, MK 3) In order to reset the Mazda 3 tire pressure warning light, you must first inflate all the tires until they are brought back to the inflation pressure…
To reset the tire pressure light of the 2018 Mazda 3.
To reset the tire pressure light of the 2018 Mazda 3.
Mazda 3 (2013-2019 / BN, BM, MK 3) If you have just inflated or replaced the tires of your 2018 Mazda 3 and want to permanently eliminate the corresponding warning light that appears o…
How to reset TPMS on Mazda 3?
Mazda 3 (2019-2026 / MK 4, BP) When the low tire pressure warning light on the instrument panel comes on, we must proceed to check the pressures of all four tires and, if necessary…

Other guides you may be interested in

Where are the Fuse Boxes on a Smart Fortwo 450?

In this guide, we will look at the location of the fuse boxes on a first series Smart Fortwo 450, along with the fuse diagram. First, locate the internal fuse box, which is found on the driver's side (by removing the plastic panel on the left); then, the guide will illustrate the codes and respective amperages associated with each individual fuse. By unscrewing the three fixing screws with a Torx T10 key, you will access the relay fuse box, with the codes illustrated as in the previous case.

Watch the video!


by ScegliAuto

More videos